Adding the CAD lab printers.

The below instructions are for adding the Canon or HP plotter for use in the CAD lab.

Depending on which one you're adding you'll need to provide the correct IP address when prompted:

- Canon IR-ADV 4725 : 10.42.88.30

- HP DJ-T650: 10.42.88.31

 

Follow these instructions for adding each printer

Open the "Start Menu"

Type in "Printers" and open the option labeled "Printers and Scanners"

At the top there will be a button to "Add a printer".  Clicking this will do a search that will most likely not find anything and give you the following options.  Select "The printer that I want isn't listed".

This will show the following dialogue; select the options in the image and click "Next"

The next window should be filled out as followed. (If the port has and added underscore like 10.42.88.30_1 etc. that's okay).  Then click "Next".

Make sure below settings are selected and click "Next".

On the next prompt, you can name the printer "Canon Printer" or "HP Plotter" depending on which one you're adding and click "Next".

It will install the printer and then as if you want to share the printer with others on your network.  Select "Do not share this printer" and click "Next".

The final dialogue box looks like this and you should be able to use that printer once you click "Finish".

 

 

Print Article

Details

Article ID: 134982
Created
Thu 10/21/21 9:22 AM
Modified
Thu 10/21/21 9:23 AM